Medium Carpenter Ant Brood Nest Kit GEN 2
$22.99
Medium Carpenter Ant Brood Nest
* Designed for carpenter ant species
* Open space for piling up brood
* Sidewall Humidification System
* Size: 4"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Aesthetically designed give a more naturalistic wood grain structure.
Intended for use with carpenter ant species.
For established colonies with lots of brood and workers.
Specially design to allow your ants to pile all their brood together.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Four reamed 1/2" nest entrances.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Nest chambers are about 1/2" deep.
Comes with:
1X Gen 2 Brood Nest (4"Wide X 4" Long X 7/8" Tall)
1X Medium Polycarbonate Window
1X Medium Window Ring
1X Medium Cover
1X Medium Nest Package of 10mm Water Beads
4X Threaded Venting Plug V2
1X Medium Hydration Base
1X Transparent Red Film
2ft x ½ x ⅜ Vinyl Tubing
Outworlds (foraging grounds) are a must for your ants to survive. Sold Separately.
* Designed for carpenter ant species
* Open space for piling up brood
* Sidewall Humidification System
* Size: 4"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Aesthetically designed give a more naturalistic wood grain structure.
Intended for use with carpenter ant species.
For established colonies with lots of brood and workers.
Specially design to allow your ants to pile all their brood together.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Four reamed 1/2" nest entrances.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Nest chambers are about 1/2" deep.
Comes with:
1X Gen 2 Brood Nest (4"Wide X 4" Long X 7/8" Tall)
1X Medium Polycarbonate Window
1X Medium Window Ring
1X Medium Cover
1X Medium Nest Package of 10mm Water Beads
4X Threaded Venting Plug V2
1X Medium Hydration Base
1X Transparent Red Film
2ft x ½ x ⅜ Vinyl Tubing
Outworlds (foraging grounds) are a must for your ants to survive. Sold Separately.
Quantity:
Medium Carpenter Ant Brood Nest
* Designed for carpenter ant species
* Open space for piling up brood
* Sidewall Humidification System
* Size: 4"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Aesthetically designed give a more naturalistic wood grain structure.
Intended for use with carpenter ant species.
For established colonies with lots of brood and workers.
Specially design to allow your ants to pile all their brood together.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Four reamed 1/2" nest entrances.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Nest chambers are about 1/2" deep.
Comes with:
1X Gen 2 Brood Nest (4"Wide X 4" Long X 7/8" Tall)
1X Medium Polycarbonate Window
1X Medium Window Ring
1X Medium Cover
1X Medium Nest Package of 10mm Water Beads
4X Threaded Venting Plug V2
1X Medium Hydration Base
1X Transparent Red Film
2ft x ½ x ⅜ Vinyl Tubing
Outworlds (foraging grounds) are a must for your ants to survive. Sold Separately.
* Designed for carpenter ant species
* Open space for piling up brood
* Sidewall Humidification System
* Size: 4"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Aesthetically designed give a more naturalistic wood grain structure.
Intended for use with carpenter ant species.
For established colonies with lots of brood and workers.
Specially design to allow your ants to pile all their brood together.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Four reamed 1/2" nest entrances.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Nest chambers are about 1/2" deep.
Comes with:
1X Gen 2 Brood Nest (4"Wide X 4" Long X 7/8" Tall)
1X Medium Polycarbonate Window
1X Medium Window Ring
1X Medium Cover
1X Medium Nest Package of 10mm Water Beads
4X Threaded Venting Plug V2
1X Medium Hydration Base
1X Transparent Red Film
2ft x ½ x ⅜ Vinyl Tubing
Outworlds (foraging grounds) are a must for your ants to survive. Sold Separately.
Medium Carpenter Ant Brood Nest
* Designed for carpenter ant species
* Open space for piling up brood
* Sidewall Humidification System
* Size: 4"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Aesthetically designed give a more naturalistic wood grain structure.
Intended for use with carpenter ant species.
For established colonies with lots of brood and workers.
Specially design to allow your ants to pile all their brood together.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Four reamed 1/2" nest entrances.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Nest chambers are about 1/2" deep.
Comes with:
1X Gen 2 Brood Nest (4"Wide X 4" Long X 7/8" Tall)
1X Medium Polycarbonate Window
1X Medium Window Ring
1X Medium Cover
1X Medium Nest Package of 10mm Water Beads
4X Threaded Venting Plug V2
1X Medium Hydration Base
1X Transparent Red Film
2ft x ½ x ⅜ Vinyl Tubing
Outworlds (foraging grounds) are a must for your ants to survive. Sold Separately.
* Designed for carpenter ant species
* Open space for piling up brood
* Sidewall Humidification System
* Size: 4"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Aesthetically designed give a more naturalistic wood grain structure.
Intended for use with carpenter ant species.
For established colonies with lots of brood and workers.
Specially design to allow your ants to pile all their brood together.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Four reamed 1/2" nest entrances.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Nest chambers are about 1/2" deep.
Comes with:
1X Gen 2 Brood Nest (4"Wide X 4" Long X 7/8" Tall)
1X Medium Polycarbonate Window
1X Medium Window Ring
1X Medium Cover
1X Medium Nest Package of 10mm Water Beads
4X Threaded Venting Plug V2
1X Medium Hydration Base
1X Transparent Red Film
2ft x ½ x ⅜ Vinyl Tubing
Outworlds (foraging grounds) are a must for your ants to survive. Sold Separately.