Nest For Tiny Ants, Small GEN2
from $18.49
Small Ant Nest for Tiny Species.
* Designed for Tiny ant species
* Centralized Entrance Tunnel
* Sidewall Humidification System
* Infused Stainless Steel Mesh
* Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Too much space for your starting colony isn’t a good thing. Always start small and expand as they grow in numbers.
For young colonies ready to move out of a test tube setup.
Side wall humidification. Built in 304 stainless steel micro mesh will allow humid air to pass trough while keeping your ants in. With sidewall humidification debris can't fall through that could lead to mold growth under your nest. Designed to use 9-11mm water beads that released humid air more slowly over time. (add or subtract water beads as required for desired humidity levels).
3D printed using PETG.
Nest chamber depth is ~3/8".
Nest entrance tunnels under the nest and emerges from within.
Escape proof tested with Tapinoma Sessile. Common odorous house ant. These guys are tiny.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
Comes with:
1X Nest (2"Wide X 4" Long X 7/8" Tall)
1X Hydration Base
1X Package of 10mm Water Beads (Replacement included)
1X Polycarbonate Window
1X Window Ring
1X Cover
1X Threaded Venting Plug https://www.etsy.com/AntersAssemble/listing/1292868237
1X Transparent Red Filter
Optional Accessories Kit:
2X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
1X Single and 1X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
1ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for Tiny ant species
* Centralized Entrance Tunnel
* Sidewall Humidification System
* Infused Stainless Steel Mesh
* Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Too much space for your starting colony isn’t a good thing. Always start small and expand as they grow in numbers.
For young colonies ready to move out of a test tube setup.
Side wall humidification. Built in 304 stainless steel micro mesh will allow humid air to pass trough while keeping your ants in. With sidewall humidification debris can't fall through that could lead to mold growth under your nest. Designed to use 9-11mm water beads that released humid air more slowly over time. (add or subtract water beads as required for desired humidity levels).
3D printed using PETG.
Nest chamber depth is ~3/8".
Nest entrance tunnels under the nest and emerges from within.
Escape proof tested with Tapinoma Sessile. Common odorous house ant. These guys are tiny.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
Comes with:
1X Nest (2"Wide X 4" Long X 7/8" Tall)
1X Hydration Base
1X Package of 10mm Water Beads (Replacement included)
1X Polycarbonate Window
1X Window Ring
1X Cover
1X Threaded Venting Plug https://www.etsy.com/AntersAssemble/listing/1292868237
1X Transparent Red Filter
Optional Accessories Kit:
2X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
1X Single and 1X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
1ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
Optional Accessories Kit:
Quantity:
Small Ant Nest for Tiny Species.
* Designed for Tiny ant species
* Centralized Entrance Tunnel
* Sidewall Humidification System
* Infused Stainless Steel Mesh
* Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Too much space for your starting colony isn’t a good thing. Always start small and expand as they grow in numbers.
For young colonies ready to move out of a test tube setup.
Side wall humidification. Built in 304 stainless steel micro mesh will allow humid air to pass trough while keeping your ants in. With sidewall humidification debris can't fall through that could lead to mold growth under your nest. Designed to use 9-11mm water beads that released humid air more slowly over time. (add or subtract water beads as required for desired humidity levels).
3D printed using PETG.
Nest chamber depth is ~3/8".
Nest entrance tunnels under the nest and emerges from within.
Escape proof tested with Tapinoma Sessile. Common odorous house ant. These guys are tiny.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
Comes with:
1X Nest (2"Wide X 4" Long X 7/8" Tall)
1X Hydration Base
1X Package of 10mm Water Beads (Replacement included)
1X Polycarbonate Window
1X Window Ring
1X Cover
1X Threaded Venting Plug https://www.etsy.com/AntersAssemble/listing/1292868237
1X Transparent Red Filter
Optional Accessories Kit:
2X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
1X Single and 1X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
1ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for Tiny ant species
* Centralized Entrance Tunnel
* Sidewall Humidification System
* Infused Stainless Steel Mesh
* Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Too much space for your starting colony isn’t a good thing. Always start small and expand as they grow in numbers.
For young colonies ready to move out of a test tube setup.
Side wall humidification. Built in 304 stainless steel micro mesh will allow humid air to pass trough while keeping your ants in. With sidewall humidification debris can't fall through that could lead to mold growth under your nest. Designed to use 9-11mm water beads that released humid air more slowly over time. (add or subtract water beads as required for desired humidity levels).
3D printed using PETG.
Nest chamber depth is ~3/8".
Nest entrance tunnels under the nest and emerges from within.
Escape proof tested with Tapinoma Sessile. Common odorous house ant. These guys are tiny.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
Comes with:
1X Nest (2"Wide X 4" Long X 7/8" Tall)
1X Hydration Base
1X Package of 10mm Water Beads (Replacement included)
1X Polycarbonate Window
1X Window Ring
1X Cover
1X Threaded Venting Plug https://www.etsy.com/AntersAssemble/listing/1292868237
1X Transparent Red Filter
Optional Accessories Kit:
2X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
1X Single and 1X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
1ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
Small Ant Nest for Tiny Species.
* Designed for Tiny ant species
* Centralized Entrance Tunnel
* Sidewall Humidification System
* Infused Stainless Steel Mesh
* Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Too much space for your starting colony isn’t a good thing. Always start small and expand as they grow in numbers.
For young colonies ready to move out of a test tube setup.
Side wall humidification. Built in 304 stainless steel micro mesh will allow humid air to pass trough while keeping your ants in. With sidewall humidification debris can't fall through that could lead to mold growth under your nest. Designed to use 9-11mm water beads that released humid air more slowly over time. (add or subtract water beads as required for desired humidity levels).
3D printed using PETG.
Nest chamber depth is ~3/8".
Nest entrance tunnels under the nest and emerges from within.
Escape proof tested with Tapinoma Sessile. Common odorous house ant. These guys are tiny.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
Comes with:
1X Nest (2"Wide X 4" Long X 7/8" Tall)
1X Hydration Base
1X Package of 10mm Water Beads (Replacement included)
1X Polycarbonate Window
1X Window Ring
1X Cover
1X Threaded Venting Plug https://www.etsy.com/AntersAssemble/listing/1292868237
1X Transparent Red Filter
Optional Accessories Kit:
2X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
1X Single and 1X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
1ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for Tiny ant species
* Centralized Entrance Tunnel
* Sidewall Humidification System
* Infused Stainless Steel Mesh
* Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Too much space for your starting colony isn’t a good thing. Always start small and expand as they grow in numbers.
For young colonies ready to move out of a test tube setup.
Side wall humidification. Built in 304 stainless steel micro mesh will allow humid air to pass trough while keeping your ants in. With sidewall humidification debris can't fall through that could lead to mold growth under your nest. Designed to use 9-11mm water beads that released humid air more slowly over time. (add or subtract water beads as required for desired humidity levels).
3D printed using PETG.
Nest chamber depth is ~3/8".
Nest entrance tunnels under the nest and emerges from within.
Escape proof tested with Tapinoma Sessile. Common odorous house ant. These guys are tiny.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
Comes with:
1X Nest (2"Wide X 4" Long X 7/8" Tall)
1X Hydration Base
1X Package of 10mm Water Beads (Replacement included)
1X Polycarbonate Window
1X Window Ring
1X Cover
1X Threaded Venting Plug https://www.etsy.com/AntersAssemble/listing/1292868237
1X Transparent Red Filter
Optional Accessories Kit:
2X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
1X Single and 1X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
1ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.