Outworld 8.1"X8.1"X6.5" For Ants and Other Insects, Formicarium, 1.5 Gal
$40.00
An outworld is a must for your established ant colony. They simply need an open foraging ground to explore and find food. Without one they will likely not survive.
This outworld is equipped with a 5.0" inch removable cover to make it easy to feed and clean up after your ants. This newly improved design features a partially threaded cover which can be quickly inserted 75% of the way before locking, preventing escapers in a mad dash for freedom. The cover effortlessly locks into place with 8 threads around the circumference. The partial threading allows for a fast cover alignment.
The ultra fine 304 Stainless steel screen mesh provides a barrier for fresh air to come in but wont allow your ants escape. The mesh is heat infused into the cover an lid. Tight tolerances between the lid and cover (~.005 inches) will prevent most insects from passing through even before locking.
Why Frosty/clear? Ants like to hide in darker areas. Our previous outworld was black which tended to attract ants to the top.
Check out the Glow In the Dark version!! Frosty white in daylight, glows green in the dark.
Lid is secured with aquarium safe silicon adhesive.
3D printed using plastic PETG.
Overall Size is ~ 8.1"X8.1"X6.5" Tall (206X206X165mm)
Volume ~ 1.5 Gallons
Two 1/2" Removable Entrance Ports.
Comes with:
1X Large Outworld and Cover
2X 1/2" ID Ports Adapters
2X Silicone O-rings
2X Venting Plugs.
This nest may not keep in all species of ants. If you are keeping especially tiny ants we suggest applying a slip barrier to further prevent them from escaping.
For best Glow In The Dark results, place bright light close to the formicarium and let charge for about 10 minutes. Results will vary on lighting conditions.
This outworld is equipped with a 5.0" inch removable cover to make it easy to feed and clean up after your ants. This newly improved design features a partially threaded cover which can be quickly inserted 75% of the way before locking, preventing escapers in a mad dash for freedom. The cover effortlessly locks into place with 8 threads around the circumference. The partial threading allows for a fast cover alignment.
The ultra fine 304 Stainless steel screen mesh provides a barrier for fresh air to come in but wont allow your ants escape. The mesh is heat infused into the cover an lid. Tight tolerances between the lid and cover (~.005 inches) will prevent most insects from passing through even before locking.
Why Frosty/clear? Ants like to hide in darker areas. Our previous outworld was black which tended to attract ants to the top.
Check out the Glow In the Dark version!! Frosty white in daylight, glows green in the dark.
Lid is secured with aquarium safe silicon adhesive.
3D printed using plastic PETG.
Overall Size is ~ 8.1"X8.1"X6.5" Tall (206X206X165mm)
Volume ~ 1.5 Gallons
Two 1/2" Removable Entrance Ports.
Comes with:
1X Large Outworld and Cover
2X 1/2" ID Ports Adapters
2X Silicone O-rings
2X Venting Plugs.
This nest may not keep in all species of ants. If you are keeping especially tiny ants we suggest applying a slip barrier to further prevent them from escaping.
For best Glow In The Dark results, place bright light close to the formicarium and let charge for about 10 minutes. Results will vary on lighting conditions.
An outworld is a must for your established ant colony. They simply need an open foraging ground to explore and find food. Without one they will likely not survive.
This outworld is equipped with a 5.0" inch removable cover to make it easy to feed and clean up after your ants. This newly improved design features a partially threaded cover which can be quickly inserted 75% of the way before locking, preventing escapers in a mad dash for freedom. The cover effortlessly locks into place with 8 threads around the circumference. The partial threading allows for a fast cover alignment.
The ultra fine 304 Stainless steel screen mesh provides a barrier for fresh air to come in but wont allow your ants escape. The mesh is heat infused into the cover an lid. Tight tolerances between the lid and cover (~.005 inches) will prevent most insects from passing through even before locking.
Why Frosty/clear? Ants like to hide in darker areas. Our previous outworld was black which tended to attract ants to the top.
Check out the Glow In the Dark version!! Frosty white in daylight, glows green in the dark.
Lid is secured with aquarium safe silicon adhesive.
3D printed using plastic PETG.
Overall Size is ~ 8.1"X8.1"X6.5" Tall (206X206X165mm)
Volume ~ 1.5 Gallons
Two 1/2" Removable Entrance Ports.
Comes with:
1X Large Outworld and Cover
2X 1/2" ID Ports Adapters
2X Silicone O-rings
2X Venting Plugs.
This nest may not keep in all species of ants. If you are keeping especially tiny ants we suggest applying a slip barrier to further prevent them from escaping.
For best Glow In The Dark results, place bright light close to the formicarium and let charge for about 10 minutes. Results will vary on lighting conditions.
This outworld is equipped with a 5.0" inch removable cover to make it easy to feed and clean up after your ants. This newly improved design features a partially threaded cover which can be quickly inserted 75% of the way before locking, preventing escapers in a mad dash for freedom. The cover effortlessly locks into place with 8 threads around the circumference. The partial threading allows for a fast cover alignment.
The ultra fine 304 Stainless steel screen mesh provides a barrier for fresh air to come in but wont allow your ants escape. The mesh is heat infused into the cover an lid. Tight tolerances between the lid and cover (~.005 inches) will prevent most insects from passing through even before locking.
Why Frosty/clear? Ants like to hide in darker areas. Our previous outworld was black which tended to attract ants to the top.
Check out the Glow In the Dark version!! Frosty white in daylight, glows green in the dark.
Lid is secured with aquarium safe silicon adhesive.
3D printed using plastic PETG.
Overall Size is ~ 8.1"X8.1"X6.5" Tall (206X206X165mm)
Volume ~ 1.5 Gallons
Two 1/2" Removable Entrance Ports.
Comes with:
1X Large Outworld and Cover
2X 1/2" ID Ports Adapters
2X Silicone O-rings
2X Venting Plugs.
This nest may not keep in all species of ants. If you are keeping especially tiny ants we suggest applying a slip barrier to further prevent them from escaping.
For best Glow In The Dark results, place bright light close to the formicarium and let charge for about 10 minutes. Results will vary on lighting conditions.
An outworld is a must for your established ant colony. They simply need an open foraging ground to explore and find food. Without one they will likely not survive.
This outworld is equipped with a 5.0" inch removable cover to make it easy to feed and clean up after your ants. This newly improved design features a partially threaded cover which can be quickly inserted 75% of the way before locking, preventing escapers in a mad dash for freedom. The cover effortlessly locks into place with 8 threads around the circumference. The partial threading allows for a fast cover alignment.
The ultra fine 304 Stainless steel screen mesh provides a barrier for fresh air to come in but wont allow your ants escape. The mesh is heat infused into the cover an lid. Tight tolerances between the lid and cover (~.005 inches) will prevent most insects from passing through even before locking.
Why Frosty/clear? Ants like to hide in darker areas. Our previous outworld was black which tended to attract ants to the top.
Check out the Glow In the Dark version!! Frosty white in daylight, glows green in the dark.
Lid is secured with aquarium safe silicon adhesive.
3D printed using plastic PETG.
Overall Size is ~ 8.1"X8.1"X6.5" Tall (206X206X165mm)
Volume ~ 1.5 Gallons
Two 1/2" Removable Entrance Ports.
Comes with:
1X Large Outworld and Cover
2X 1/2" ID Ports Adapters
2X Silicone O-rings
2X Venting Plugs.
This nest may not keep in all species of ants. If you are keeping especially tiny ants we suggest applying a slip barrier to further prevent them from escaping.
For best Glow In The Dark results, place bright light close to the formicarium and let charge for about 10 minutes. Results will vary on lighting conditions.
This outworld is equipped with a 5.0" inch removable cover to make it easy to feed and clean up after your ants. This newly improved design features a partially threaded cover which can be quickly inserted 75% of the way before locking, preventing escapers in a mad dash for freedom. The cover effortlessly locks into place with 8 threads around the circumference. The partial threading allows for a fast cover alignment.
The ultra fine 304 Stainless steel screen mesh provides a barrier for fresh air to come in but wont allow your ants escape. The mesh is heat infused into the cover an lid. Tight tolerances between the lid and cover (~.005 inches) will prevent most insects from passing through even before locking.
Why Frosty/clear? Ants like to hide in darker areas. Our previous outworld was black which tended to attract ants to the top.
Check out the Glow In the Dark version!! Frosty white in daylight, glows green in the dark.
Lid is secured with aquarium safe silicon adhesive.
3D printed using plastic PETG.
Overall Size is ~ 8.1"X8.1"X6.5" Tall (206X206X165mm)
Volume ~ 1.5 Gallons
Two 1/2" Removable Entrance Ports.
Comes with:
1X Large Outworld and Cover
2X 1/2" ID Ports Adapters
2X Silicone O-rings
2X Venting Plugs.
This nest may not keep in all species of ants. If you are keeping especially tiny ants we suggest applying a slip barrier to further prevent them from escaping.
For best Glow In The Dark results, place bright light close to the formicarium and let charge for about 10 minutes. Results will vary on lighting conditions.