Small Carpenter Ant Brood Nest Kit, GEN 2
from $14.49
Small Carpenter Ant Brood Nest
* Designed for carpenter ant species.
* Sidewall Humidification System
* Size: 2"X4" (Excluding Base)
* Easily open for cleaning
* Plastic PETG
For young colonies needing the extra brood space.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
1X Nest (2"Wide X 4" Long X 7/8" Tall)
1X Window Ring
1X Small Hydration Base
1X Small Pack of 10mm Water Beads
1X Window
1X Cover
1X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
1X Transparent Red Film
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/898599533
1X Single and 1X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
1ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Not recommended for smaller size ant species.
We now offer an outworld (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for carpenter ant species.
* Sidewall Humidification System
* Size: 2"X4" (Excluding Base)
* Easily open for cleaning
* Plastic PETG
For young colonies needing the extra brood space.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
1X Nest (2"Wide X 4" Long X 7/8" Tall)
1X Window Ring
1X Small Hydration Base
1X Small Pack of 10mm Water Beads
1X Window
1X Cover
1X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
1X Transparent Red Film
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/898599533
1X Single and 1X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
1ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Not recommended for smaller size ant species.
We now offer an outworld (foraging grounds), it is a must for your ants to survive. Sold Separately.
Accessories Kit:
Quantity:
Small Carpenter Ant Brood Nest
* Designed for carpenter ant species.
* Sidewall Humidification System
* Size: 2"X4" (Excluding Base)
* Easily open for cleaning
* Plastic PETG
For young colonies needing the extra brood space.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
1X Nest (2"Wide X 4" Long X 7/8" Tall)
1X Window Ring
1X Small Hydration Base
1X Small Pack of 10mm Water Beads
1X Window
1X Cover
1X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
1X Transparent Red Film
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/898599533
1X Single and 1X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
1ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Not recommended for smaller size ant species.
We now offer an outworld (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for carpenter ant species.
* Sidewall Humidification System
* Size: 2"X4" (Excluding Base)
* Easily open for cleaning
* Plastic PETG
For young colonies needing the extra brood space.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
1X Nest (2"Wide X 4" Long X 7/8" Tall)
1X Window Ring
1X Small Hydration Base
1X Small Pack of 10mm Water Beads
1X Window
1X Cover
1X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
1X Transparent Red Film
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/898599533
1X Single and 1X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
1ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Not recommended for smaller size ant species.
We now offer an outworld (foraging grounds), it is a must for your ants to survive. Sold Separately.
Small Carpenter Ant Brood Nest
* Designed for carpenter ant species.
* Sidewall Humidification System
* Size: 2"X4" (Excluding Base)
* Easily open for cleaning
* Plastic PETG
For young colonies needing the extra brood space.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
1X Nest (2"Wide X 4" Long X 7/8" Tall)
1X Window Ring
1X Small Hydration Base
1X Small Pack of 10mm Water Beads
1X Window
1X Cover
1X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
1X Transparent Red Film
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/898599533
1X Single and 1X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
1ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Not recommended for smaller size ant species.
We now offer an outworld (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for carpenter ant species.
* Sidewall Humidification System
* Size: 2"X4" (Excluding Base)
* Easily open for cleaning
* Plastic PETG
For young colonies needing the extra brood space.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
1X Nest (2"Wide X 4" Long X 7/8" Tall)
1X Window Ring
1X Small Hydration Base
1X Small Pack of 10mm Water Beads
1X Window
1X Cover
1X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
1X Transparent Red Film
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/898599533
1X Single and 1X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
1ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Not recommended for smaller size ant species.
We now offer an outworld (foraging grounds), it is a must for your ants to survive. Sold Separately.