Small Duplex Carpenter Ant Nest Kit, GEN 2
from $26.49
Duplex Carpenter Ant Nest
* Designed for carpenter ant species.
* Sidewall Humidification System
* Each Nest Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Choose your Duplex Nest.
See Single Nest Versions
Single Carpenter Nest Listing
https://www.etsy.com/AntersAssemble/listing/1089515703
Single Carpenter Brood Nest Listing
https://www.etsy.com/AntersAssemble/listing/1127122585
Made for carpenter ant species.
For young colonies ready to move out of a test tube setup.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
2X Nest (2"Wide X 4" Long X 7/8" Tall)
2X Window Rings
1X Medium Hydration Base
1X Medium Size pack of 10mm Water Beads
2X Windows
2X Covers
1X Duplex Combiner Connector
2X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
2X Transparent Red Films
Recommended but Optional Accessories Kit:
4X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
4X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
4X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
2X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
2X Single and 2X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
2ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not design to provide direct access to drinking water, nor should it. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Not recommended for smaller size ant species.
** Windows removed in some images due of glare**
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for carpenter ant species.
* Sidewall Humidification System
* Each Nest Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Choose your Duplex Nest.
See Single Nest Versions
Single Carpenter Nest Listing
https://www.etsy.com/AntersAssemble/listing/1089515703
Single Carpenter Brood Nest Listing
https://www.etsy.com/AntersAssemble/listing/1127122585
Made for carpenter ant species.
For young colonies ready to move out of a test tube setup.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
2X Nest (2"Wide X 4" Long X 7/8" Tall)
2X Window Rings
1X Medium Hydration Base
1X Medium Size pack of 10mm Water Beads
2X Windows
2X Covers
1X Duplex Combiner Connector
2X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
2X Transparent Red Films
Recommended but Optional Accessories Kit:
4X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
4X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
4X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
2X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
2X Single and 2X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
2ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not design to provide direct access to drinking water, nor should it. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Not recommended for smaller size ant species.
** Windows removed in some images due of glare**
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
Accessories:
Style:
Quantity:
Duplex Carpenter Ant Nest
* Designed for carpenter ant species.
* Sidewall Humidification System
* Each Nest Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Choose your Duplex Nest.
See Single Nest Versions
Single Carpenter Nest Listing
https://www.etsy.com/AntersAssemble/listing/1089515703
Single Carpenter Brood Nest Listing
https://www.etsy.com/AntersAssemble/listing/1127122585
Made for carpenter ant species.
For young colonies ready to move out of a test tube setup.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
2X Nest (2"Wide X 4" Long X 7/8" Tall)
2X Window Rings
1X Medium Hydration Base
1X Medium Size pack of 10mm Water Beads
2X Windows
2X Covers
1X Duplex Combiner Connector
2X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
2X Transparent Red Films
Recommended but Optional Accessories Kit:
4X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
4X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
4X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
2X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
2X Single and 2X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
2ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not design to provide direct access to drinking water, nor should it. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Not recommended for smaller size ant species.
** Windows removed in some images due of glare**
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for carpenter ant species.
* Sidewall Humidification System
* Each Nest Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Choose your Duplex Nest.
See Single Nest Versions
Single Carpenter Nest Listing
https://www.etsy.com/AntersAssemble/listing/1089515703
Single Carpenter Brood Nest Listing
https://www.etsy.com/AntersAssemble/listing/1127122585
Made for carpenter ant species.
For young colonies ready to move out of a test tube setup.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
2X Nest (2"Wide X 4" Long X 7/8" Tall)
2X Window Rings
1X Medium Hydration Base
1X Medium Size pack of 10mm Water Beads
2X Windows
2X Covers
1X Duplex Combiner Connector
2X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
2X Transparent Red Films
Recommended but Optional Accessories Kit:
4X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
4X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
4X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
2X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
2X Single and 2X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
2ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not design to provide direct access to drinking water, nor should it. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Not recommended for smaller size ant species.
** Windows removed in some images due of glare**
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
Duplex Carpenter Ant Nest
* Designed for carpenter ant species.
* Sidewall Humidification System
* Each Nest Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Choose your Duplex Nest.
See Single Nest Versions
Single Carpenter Nest Listing
https://www.etsy.com/AntersAssemble/listing/1089515703
Single Carpenter Brood Nest Listing
https://www.etsy.com/AntersAssemble/listing/1127122585
Made for carpenter ant species.
For young colonies ready to move out of a test tube setup.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
2X Nest (2"Wide X 4" Long X 7/8" Tall)
2X Window Rings
1X Medium Hydration Base
1X Medium Size pack of 10mm Water Beads
2X Windows
2X Covers
1X Duplex Combiner Connector
2X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
2X Transparent Red Films
Recommended but Optional Accessories Kit:
4X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
4X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
4X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
2X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
2X Single and 2X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
2ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not design to provide direct access to drinking water, nor should it. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Not recommended for smaller size ant species.
** Windows removed in some images due of glare**
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for carpenter ant species.
* Sidewall Humidification System
* Each Nest Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Choose your Duplex Nest.
See Single Nest Versions
Single Carpenter Nest Listing
https://www.etsy.com/AntersAssemble/listing/1089515703
Single Carpenter Brood Nest Listing
https://www.etsy.com/AntersAssemble/listing/1127122585
Made for carpenter ant species.
For young colonies ready to move out of a test tube setup.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
2X Nest (2"Wide X 4" Long X 7/8" Tall)
2X Window Rings
1X Medium Hydration Base
1X Medium Size pack of 10mm Water Beads
2X Windows
2X Covers
1X Duplex Combiner Connector
2X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
2X Transparent Red Films
Recommended but Optional Accessories Kit:
4X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
4X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
4X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
2X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
2X Single and 2X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
2ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not design to provide direct access to drinking water, nor should it. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Not recommended for smaller size ant species.
** Windows removed in some images due of glare**
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.