Small Harvester Ant Nest Kit, GEN 2
from $16.99
Small Harvester Ant Nest Kit
* Designed for large harvester ant species such as Pogonomyrmex barbatus.
* Sidewall Humidification System
* Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
* Wide chamber passages.
* Varying elevation floor design
* Concave walls
* Red desert sand texture (optional)
For small colonies that have outgrown their test tube setup.
Our unique side wall humidification won't let debris fall through the nest to the base.
The base is designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot and crack when exposed to water unlike PLA printed nests.
Note: Window not shown due to glare in images.
Nest chamber depth is ~1/2".
Five nest entry ports.
Comes with:
1X Small Hydration Base
1X Small Nest Package of 10mm Water Beads
1X Small Polycarbonate Window (Preinstalled)
1X Small Window Ring
1X Small Cover
4X Threaded Venting Plug
1X Transparent Red Filter
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes
2X Feeding Tube Male Adapters
2X Feeding Tube Female Adapters
1X 4 Way Tubing Splitter
2ft x ½ x ⅜ Vinyl Tubing
2X Single Tubing Organizer
2X Double Tubing Organizer
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
We carry various outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for large harvester ant species such as Pogonomyrmex barbatus.
* Sidewall Humidification System
* Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
* Wide chamber passages.
* Varying elevation floor design
* Concave walls
* Red desert sand texture (optional)
For small colonies that have outgrown their test tube setup.
Our unique side wall humidification won't let debris fall through the nest to the base.
The base is designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot and crack when exposed to water unlike PLA printed nests.
Note: Window not shown due to glare in images.
Nest chamber depth is ~1/2".
Five nest entry ports.
Comes with:
1X Small Hydration Base
1X Small Nest Package of 10mm Water Beads
1X Small Polycarbonate Window (Preinstalled)
1X Small Window Ring
1X Small Cover
4X Threaded Venting Plug
1X Transparent Red Filter
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes
2X Feeding Tube Male Adapters
2X Feeding Tube Female Adapters
1X 4 Way Tubing Splitter
2ft x ½ x ⅜ Vinyl Tubing
2X Single Tubing Organizer
2X Double Tubing Organizer
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
We carry various outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
Optional Accessories Kit:
Textured:
Quantity:
Small Harvester Ant Nest Kit
* Designed for large harvester ant species such as Pogonomyrmex barbatus.
* Sidewall Humidification System
* Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
* Wide chamber passages.
* Varying elevation floor design
* Concave walls
* Red desert sand texture (optional)
For small colonies that have outgrown their test tube setup.
Our unique side wall humidification won't let debris fall through the nest to the base.
The base is designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot and crack when exposed to water unlike PLA printed nests.
Note: Window not shown due to glare in images.
Nest chamber depth is ~1/2".
Five nest entry ports.
Comes with:
1X Small Hydration Base
1X Small Nest Package of 10mm Water Beads
1X Small Polycarbonate Window (Preinstalled)
1X Small Window Ring
1X Small Cover
4X Threaded Venting Plug
1X Transparent Red Filter
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes
2X Feeding Tube Male Adapters
2X Feeding Tube Female Adapters
1X 4 Way Tubing Splitter
2ft x ½ x ⅜ Vinyl Tubing
2X Single Tubing Organizer
2X Double Tubing Organizer
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
We carry various outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for large harvester ant species such as Pogonomyrmex barbatus.
* Sidewall Humidification System
* Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
* Wide chamber passages.
* Varying elevation floor design
* Concave walls
* Red desert sand texture (optional)
For small colonies that have outgrown their test tube setup.
Our unique side wall humidification won't let debris fall through the nest to the base.
The base is designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot and crack when exposed to water unlike PLA printed nests.
Note: Window not shown due to glare in images.
Nest chamber depth is ~1/2".
Five nest entry ports.
Comes with:
1X Small Hydration Base
1X Small Nest Package of 10mm Water Beads
1X Small Polycarbonate Window (Preinstalled)
1X Small Window Ring
1X Small Cover
4X Threaded Venting Plug
1X Transparent Red Filter
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes
2X Feeding Tube Male Adapters
2X Feeding Tube Female Adapters
1X 4 Way Tubing Splitter
2ft x ½ x ⅜ Vinyl Tubing
2X Single Tubing Organizer
2X Double Tubing Organizer
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
We carry various outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
Small Harvester Ant Nest Kit
* Designed for large harvester ant species such as Pogonomyrmex barbatus.
* Sidewall Humidification System
* Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
* Wide chamber passages.
* Varying elevation floor design
* Concave walls
* Red desert sand texture (optional)
For small colonies that have outgrown their test tube setup.
Our unique side wall humidification won't let debris fall through the nest to the base.
The base is designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot and crack when exposed to water unlike PLA printed nests.
Note: Window not shown due to glare in images.
Nest chamber depth is ~1/2".
Five nest entry ports.
Comes with:
1X Small Hydration Base
1X Small Nest Package of 10mm Water Beads
1X Small Polycarbonate Window (Preinstalled)
1X Small Window Ring
1X Small Cover
4X Threaded Venting Plug
1X Transparent Red Filter
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes
2X Feeding Tube Male Adapters
2X Feeding Tube Female Adapters
1X 4 Way Tubing Splitter
2ft x ½ x ⅜ Vinyl Tubing
2X Single Tubing Organizer
2X Double Tubing Organizer
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
We carry various outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for large harvester ant species such as Pogonomyrmex barbatus.
* Sidewall Humidification System
* Size: 2"X4" (Excluding Base)
* Easy open for cleaning
* Plastic PETG
* Wide chamber passages.
* Varying elevation floor design
* Concave walls
* Red desert sand texture (optional)
For small colonies that have outgrown their test tube setup.
Our unique side wall humidification won't let debris fall through the nest to the base.
The base is designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot and crack when exposed to water unlike PLA printed nests.
Note: Window not shown due to glare in images.
Nest chamber depth is ~1/2".
Five nest entry ports.
Comes with:
1X Small Hydration Base
1X Small Nest Package of 10mm Water Beads
1X Small Polycarbonate Window (Preinstalled)
1X Small Window Ring
1X Small Cover
4X Threaded Venting Plug
1X Transparent Red Filter
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes
2X Feeding Tube Male Adapters
2X Feeding Tube Female Adapters
1X 4 Way Tubing Splitter
2ft x ½ x ⅜ Vinyl Tubing
2X Single Tubing Organizer
2X Double Tubing Organizer
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
We carry various outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.