Small Quad Carpenter Ant Nest Kit, GEN 2
from $43.49
Quad Carpenter Ant Nest
* Designed for carpenter ant species.
* Sidewall Humidification System
* Holds four Size: 2"X4" (Excluding Base) Nests
* Easy open for cleaning
* Plastic PETG
House up to 4 separated colonies on just one base.
All the same as the single starter nest but on one base. Saving you money.
See Single Nest Versions for more detailed views of nests.
Single Carpenter Nest Listing
https://www.etsy.com/AntersAssemble/listing/1089515703
Single Carpenter Brood Nest Listing
https://www.etsy.com/AntersAssemble/listing/1127122585
Made for carpenter ant species.
For young colonies ready to move out of a test tube setup.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
4X Nest (2"Wide X 4" Long X 7/8" Tall)
4X Window Ring
4X Small Hydration Base
4X Small Pack of 10mm Water Beads
4X Window
4X Covers
4X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
2X Transparent Red Films
2X Duplex Combiners
Recommended but Optional Accessories Kit:
8X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
8X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
8X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
4X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
4X Single and 4X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
4ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water, nor should it. You will need to attach external feeding tubes included in the optional accessories kit which can be added or are purchased separately.
We now offer various outworlds (foraging grounds), it is a must for your ants to survive. Sold separately.
* Designed for carpenter ant species.
* Sidewall Humidification System
* Holds four Size: 2"X4" (Excluding Base) Nests
* Easy open for cleaning
* Plastic PETG
House up to 4 separated colonies on just one base.
All the same as the single starter nest but on one base. Saving you money.
See Single Nest Versions for more detailed views of nests.
Single Carpenter Nest Listing
https://www.etsy.com/AntersAssemble/listing/1089515703
Single Carpenter Brood Nest Listing
https://www.etsy.com/AntersAssemble/listing/1127122585
Made for carpenter ant species.
For young colonies ready to move out of a test tube setup.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
4X Nest (2"Wide X 4" Long X 7/8" Tall)
4X Window Ring
4X Small Hydration Base
4X Small Pack of 10mm Water Beads
4X Window
4X Covers
4X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
2X Transparent Red Films
2X Duplex Combiners
Recommended but Optional Accessories Kit:
8X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
8X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
8X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
4X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
4X Single and 4X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
4ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water, nor should it. You will need to attach external feeding tubes included in the optional accessories kit which can be added or are purchased separately.
We now offer various outworlds (foraging grounds), it is a must for your ants to survive. Sold separately.
Style:
Add Accessories Kit:
Quantity:
Quad Carpenter Ant Nest
* Designed for carpenter ant species.
* Sidewall Humidification System
* Holds four Size: 2"X4" (Excluding Base) Nests
* Easy open for cleaning
* Plastic PETG
House up to 4 separated colonies on just one base.
All the same as the single starter nest but on one base. Saving you money.
See Single Nest Versions for more detailed views of nests.
Single Carpenter Nest Listing
https://www.etsy.com/AntersAssemble/listing/1089515703
Single Carpenter Brood Nest Listing
https://www.etsy.com/AntersAssemble/listing/1127122585
Made for carpenter ant species.
For young colonies ready to move out of a test tube setup.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
4X Nest (2"Wide X 4" Long X 7/8" Tall)
4X Window Ring
4X Small Hydration Base
4X Small Pack of 10mm Water Beads
4X Window
4X Covers
4X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
2X Transparent Red Films
2X Duplex Combiners
Recommended but Optional Accessories Kit:
8X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
8X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
8X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
4X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
4X Single and 4X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
4ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water, nor should it. You will need to attach external feeding tubes included in the optional accessories kit which can be added or are purchased separately.
We now offer various outworlds (foraging grounds), it is a must for your ants to survive. Sold separately.
* Designed for carpenter ant species.
* Sidewall Humidification System
* Holds four Size: 2"X4" (Excluding Base) Nests
* Easy open for cleaning
* Plastic PETG
House up to 4 separated colonies on just one base.
All the same as the single starter nest but on one base. Saving you money.
See Single Nest Versions for more detailed views of nests.
Single Carpenter Nest Listing
https://www.etsy.com/AntersAssemble/listing/1089515703
Single Carpenter Brood Nest Listing
https://www.etsy.com/AntersAssemble/listing/1127122585
Made for carpenter ant species.
For young colonies ready to move out of a test tube setup.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
4X Nest (2"Wide X 4" Long X 7/8" Tall)
4X Window Ring
4X Small Hydration Base
4X Small Pack of 10mm Water Beads
4X Window
4X Covers
4X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
2X Transparent Red Films
2X Duplex Combiners
Recommended but Optional Accessories Kit:
8X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
8X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
8X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
4X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
4X Single and 4X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
4ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water, nor should it. You will need to attach external feeding tubes included in the optional accessories kit which can be added or are purchased separately.
We now offer various outworlds (foraging grounds), it is a must for your ants to survive. Sold separately.
Quad Carpenter Ant Nest
* Designed for carpenter ant species.
* Sidewall Humidification System
* Holds four Size: 2"X4" (Excluding Base) Nests
* Easy open for cleaning
* Plastic PETG
House up to 4 separated colonies on just one base.
All the same as the single starter nest but on one base. Saving you money.
See Single Nest Versions for more detailed views of nests.
Single Carpenter Nest Listing
https://www.etsy.com/AntersAssemble/listing/1089515703
Single Carpenter Brood Nest Listing
https://www.etsy.com/AntersAssemble/listing/1127122585
Made for carpenter ant species.
For young colonies ready to move out of a test tube setup.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
4X Nest (2"Wide X 4" Long X 7/8" Tall)
4X Window Ring
4X Small Hydration Base
4X Small Pack of 10mm Water Beads
4X Window
4X Covers
4X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
2X Transparent Red Films
2X Duplex Combiners
Recommended but Optional Accessories Kit:
8X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
8X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
8X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
4X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
4X Single and 4X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
4ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water, nor should it. You will need to attach external feeding tubes included in the optional accessories kit which can be added or are purchased separately.
We now offer various outworlds (foraging grounds), it is a must for your ants to survive. Sold separately.
* Designed for carpenter ant species.
* Sidewall Humidification System
* Holds four Size: 2"X4" (Excluding Base) Nests
* Easy open for cleaning
* Plastic PETG
House up to 4 separated colonies on just one base.
All the same as the single starter nest but on one base. Saving you money.
See Single Nest Versions for more detailed views of nests.
Single Carpenter Nest Listing
https://www.etsy.com/AntersAssemble/listing/1089515703
Single Carpenter Brood Nest Listing
https://www.etsy.com/AntersAssemble/listing/1127122585
Made for carpenter ant species.
For young colonies ready to move out of a test tube setup.
Features side wall humidification. - Debris won't fall through the nest.
Designed to use 9-11mm water beads. (add or subtract water beads as required for desired humidity levels).
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned aesthetic nest cover inspired by an ant's thorax.
Nest chamber depth is ~1/2".
3D printed using PETG which won't rot, unlike PLA printed parts when exposed to water.
Connectors printed using Tough Resin.
Comes with:
4X Nest (2"Wide X 4" Long X 7/8" Tall)
4X Window Ring
4X Small Hydration Base
4X Small Pack of 10mm Water Beads
4X Window
4X Covers
4X Threaded Venting Plug V2
https://www.etsy.com/AntersAssemble/listing/1082533529
2X Transparent Red Films
2X Duplex Combiners
Recommended but Optional Accessories Kit:
8X 16X100mm Feeding Tubes
https://www.etsy.com/AntersAssemble/listing/1275137390
8X Feeding Tube Male Adapters
https://www.etsy.com/AntersAssemble/listing/897170935
8X Feeding Tube Female Adapter
https://www.etsy.com/AntersAssemble/listing/883506308
4X 3 Way Tubing Splitter
https://www.etsy.com/AntersAssemble/listing/883209656
4X Single and 4X Double Tubing Organizers https://www.etsy.com/AntersAssemble/listing/947748858
4ft x ½ x ⅜ Vinyl Tubing
https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water, nor should it. You will need to attach external feeding tubes included in the optional accessories kit which can be added or are purchased separately.
We now offer various outworlds (foraging grounds), it is a must for your ants to survive. Sold separately.