Vertical Double Sided Carpenter Ant Nest, GEN 2
from $47.49
Vertical Carpenter Ant Nest
* Designed for carpenter ant species.
* Sidewall Humidification System
* Size: 4"X4" X 1.5"Thick (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Go Vertical!!
Give your ants more dimensions with this stand up nest.
This double sided nest allows for viewing from both sides with several pass through points.
Built in side wall humidification that will keep your nest air from drying out. Just pour water into the base to rehydrate.
Anters Assemble bases are designed to use 10mm water beads (included) that maintain a constant humidity level without drying out too fast.
3D printed using PETG.
There are 2 nest entrances mid way up the nest and 2 on the base. The two higher ports will allow your to string more vertical nest together. The two on the base will align with the standard horizontal nests we offer.
Lipped edges help prevent eggs and larvae from falling between the nest and windows.
Nests incorporate standard Anters Assemble glue-less window installation. Can be removed with a small flathead screwdriver or coin.
The standing portion of the nest is solvent cemented, sealing the two pieces together preventing any possible escape between the two sides. Extra reinforcement is given near the mid nest entrance ports to prevent separation. These ports are have custom threaded inserts what can attach to any Anters Assemble male connectors or standard 1/2" OD tubing.
Spring loaded levers hold the covers in place which will allow you to remove just one side of the nest at time if you wish.
The double vertical nest snaps into place.
The nest-to-base entrance is lined with PVC tubing.
The assembly can be taken apart for cleaning.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot and crack when exposed to water unlike PLA printed parts.
Connectors printed using Tough Resin.
Nest chamber depth is ~1/2".
Includes:
1 X Double Sided Vertical Nest
1 X Vertical Base
1 X Medium Hydration Base
2 X Medium Covers
2 X Medium Cover Rings
2 X Medium Polycarbonate Windows
1 X Medium Nest Package of Water Beads
4 X Venting Plugs https://www.etsy.com/AntersAssemble/listing/1082533529
2 X Transparent Red Film
2 X Offset Tubes (Adapts upper ports to same level as lower ports) (Not yet shown)
2 X Swivel Connectors (https://www.etsy.com/AntersAssemble/listing/1368572489)
2 X 1/2Female to 1/2 Female coupler https://www.etsy.com/AntersAssemble/listing/916742212)
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Branch Tubing Splitter https://www.etsy.com/AntersAssemble/listing/916737950
1X 4 Way Tubing Splitter https://www.etsy.com/AntersAssemble/listing/898599533
2X Single and 2X Double Tubing Organizers
https://www.etsy.com/AntersAssemble/listing/947748858
4ft x ½ x ⅜ Vinyl Tubing https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Windows were removed due to glare in pictures.
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for carpenter ant species.
* Sidewall Humidification System
* Size: 4"X4" X 1.5"Thick (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Go Vertical!!
Give your ants more dimensions with this stand up nest.
This double sided nest allows for viewing from both sides with several pass through points.
Built in side wall humidification that will keep your nest air from drying out. Just pour water into the base to rehydrate.
Anters Assemble bases are designed to use 10mm water beads (included) that maintain a constant humidity level without drying out too fast.
3D printed using PETG.
There are 2 nest entrances mid way up the nest and 2 on the base. The two higher ports will allow your to string more vertical nest together. The two on the base will align with the standard horizontal nests we offer.
Lipped edges help prevent eggs and larvae from falling between the nest and windows.
Nests incorporate standard Anters Assemble glue-less window installation. Can be removed with a small flathead screwdriver or coin.
The standing portion of the nest is solvent cemented, sealing the two pieces together preventing any possible escape between the two sides. Extra reinforcement is given near the mid nest entrance ports to prevent separation. These ports are have custom threaded inserts what can attach to any Anters Assemble male connectors or standard 1/2" OD tubing.
Spring loaded levers hold the covers in place which will allow you to remove just one side of the nest at time if you wish.
The double vertical nest snaps into place.
The nest-to-base entrance is lined with PVC tubing.
The assembly can be taken apart for cleaning.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot and crack when exposed to water unlike PLA printed parts.
Connectors printed using Tough Resin.
Nest chamber depth is ~1/2".
Includes:
1 X Double Sided Vertical Nest
1 X Vertical Base
1 X Medium Hydration Base
2 X Medium Covers
2 X Medium Cover Rings
2 X Medium Polycarbonate Windows
1 X Medium Nest Package of Water Beads
4 X Venting Plugs https://www.etsy.com/AntersAssemble/listing/1082533529
2 X Transparent Red Film
2 X Offset Tubes (Adapts upper ports to same level as lower ports) (Not yet shown)
2 X Swivel Connectors (https://www.etsy.com/AntersAssemble/listing/1368572489)
2 X 1/2Female to 1/2 Female coupler https://www.etsy.com/AntersAssemble/listing/916742212)
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Branch Tubing Splitter https://www.etsy.com/AntersAssemble/listing/916737950
1X 4 Way Tubing Splitter https://www.etsy.com/AntersAssemble/listing/898599533
2X Single and 2X Double Tubing Organizers
https://www.etsy.com/AntersAssemble/listing/947748858
4ft x ½ x ⅜ Vinyl Tubing https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Windows were removed due to glare in pictures.
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
Optional Accessories Kit:
Quantity:
Vertical Carpenter Ant Nest
* Designed for carpenter ant species.
* Sidewall Humidification System
* Size: 4"X4" X 1.5"Thick (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Go Vertical!!
Give your ants more dimensions with this stand up nest.
This double sided nest allows for viewing from both sides with several pass through points.
Built in side wall humidification that will keep your nest air from drying out. Just pour water into the base to rehydrate.
Anters Assemble bases are designed to use 10mm water beads (included) that maintain a constant humidity level without drying out too fast.
3D printed using PETG.
There are 2 nest entrances mid way up the nest and 2 on the base. The two higher ports will allow your to string more vertical nest together. The two on the base will align with the standard horizontal nests we offer.
Lipped edges help prevent eggs and larvae from falling between the nest and windows.
Nests incorporate standard Anters Assemble glue-less window installation. Can be removed with a small flathead screwdriver or coin.
The standing portion of the nest is solvent cemented, sealing the two pieces together preventing any possible escape between the two sides. Extra reinforcement is given near the mid nest entrance ports to prevent separation. These ports are have custom threaded inserts what can attach to any Anters Assemble male connectors or standard 1/2" OD tubing.
Spring loaded levers hold the covers in place which will allow you to remove just one side of the nest at time if you wish.
The double vertical nest snaps into place.
The nest-to-base entrance is lined with PVC tubing.
The assembly can be taken apart for cleaning.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot and crack when exposed to water unlike PLA printed parts.
Connectors printed using Tough Resin.
Nest chamber depth is ~1/2".
Includes:
1 X Double Sided Vertical Nest
1 X Vertical Base
1 X Medium Hydration Base
2 X Medium Covers
2 X Medium Cover Rings
2 X Medium Polycarbonate Windows
1 X Medium Nest Package of Water Beads
4 X Venting Plugs https://www.etsy.com/AntersAssemble/listing/1082533529
2 X Transparent Red Film
2 X Offset Tubes (Adapts upper ports to same level as lower ports) (Not yet shown)
2 X Swivel Connectors (https://www.etsy.com/AntersAssemble/listing/1368572489)
2 X 1/2Female to 1/2 Female coupler https://www.etsy.com/AntersAssemble/listing/916742212)
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Branch Tubing Splitter https://www.etsy.com/AntersAssemble/listing/916737950
1X 4 Way Tubing Splitter https://www.etsy.com/AntersAssemble/listing/898599533
2X Single and 2X Double Tubing Organizers
https://www.etsy.com/AntersAssemble/listing/947748858
4ft x ½ x ⅜ Vinyl Tubing https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Windows were removed due to glare in pictures.
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for carpenter ant species.
* Sidewall Humidification System
* Size: 4"X4" X 1.5"Thick (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Go Vertical!!
Give your ants more dimensions with this stand up nest.
This double sided nest allows for viewing from both sides with several pass through points.
Built in side wall humidification that will keep your nest air from drying out. Just pour water into the base to rehydrate.
Anters Assemble bases are designed to use 10mm water beads (included) that maintain a constant humidity level without drying out too fast.
3D printed using PETG.
There are 2 nest entrances mid way up the nest and 2 on the base. The two higher ports will allow your to string more vertical nest together. The two on the base will align with the standard horizontal nests we offer.
Lipped edges help prevent eggs and larvae from falling between the nest and windows.
Nests incorporate standard Anters Assemble glue-less window installation. Can be removed with a small flathead screwdriver or coin.
The standing portion of the nest is solvent cemented, sealing the two pieces together preventing any possible escape between the two sides. Extra reinforcement is given near the mid nest entrance ports to prevent separation. These ports are have custom threaded inserts what can attach to any Anters Assemble male connectors or standard 1/2" OD tubing.
Spring loaded levers hold the covers in place which will allow you to remove just one side of the nest at time if you wish.
The double vertical nest snaps into place.
The nest-to-base entrance is lined with PVC tubing.
The assembly can be taken apart for cleaning.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot and crack when exposed to water unlike PLA printed parts.
Connectors printed using Tough Resin.
Nest chamber depth is ~1/2".
Includes:
1 X Double Sided Vertical Nest
1 X Vertical Base
1 X Medium Hydration Base
2 X Medium Covers
2 X Medium Cover Rings
2 X Medium Polycarbonate Windows
1 X Medium Nest Package of Water Beads
4 X Venting Plugs https://www.etsy.com/AntersAssemble/listing/1082533529
2 X Transparent Red Film
2 X Offset Tubes (Adapts upper ports to same level as lower ports) (Not yet shown)
2 X Swivel Connectors (https://www.etsy.com/AntersAssemble/listing/1368572489)
2 X 1/2Female to 1/2 Female coupler https://www.etsy.com/AntersAssemble/listing/916742212)
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Branch Tubing Splitter https://www.etsy.com/AntersAssemble/listing/916737950
1X 4 Way Tubing Splitter https://www.etsy.com/AntersAssemble/listing/898599533
2X Single and 2X Double Tubing Organizers
https://www.etsy.com/AntersAssemble/listing/947748858
4ft x ½ x ⅜ Vinyl Tubing https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Windows were removed due to glare in pictures.
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
Vertical Carpenter Ant Nest
* Designed for carpenter ant species.
* Sidewall Humidification System
* Size: 4"X4" X 1.5"Thick (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Go Vertical!!
Give your ants more dimensions with this stand up nest.
This double sided nest allows for viewing from both sides with several pass through points.
Built in side wall humidification that will keep your nest air from drying out. Just pour water into the base to rehydrate.
Anters Assemble bases are designed to use 10mm water beads (included) that maintain a constant humidity level without drying out too fast.
3D printed using PETG.
There are 2 nest entrances mid way up the nest and 2 on the base. The two higher ports will allow your to string more vertical nest together. The two on the base will align with the standard horizontal nests we offer.
Lipped edges help prevent eggs and larvae from falling between the nest and windows.
Nests incorporate standard Anters Assemble glue-less window installation. Can be removed with a small flathead screwdriver or coin.
The standing portion of the nest is solvent cemented, sealing the two pieces together preventing any possible escape between the two sides. Extra reinforcement is given near the mid nest entrance ports to prevent separation. These ports are have custom threaded inserts what can attach to any Anters Assemble male connectors or standard 1/2" OD tubing.
Spring loaded levers hold the covers in place which will allow you to remove just one side of the nest at time if you wish.
The double vertical nest snaps into place.
The nest-to-base entrance is lined with PVC tubing.
The assembly can be taken apart for cleaning.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot and crack when exposed to water unlike PLA printed parts.
Connectors printed using Tough Resin.
Nest chamber depth is ~1/2".
Includes:
1 X Double Sided Vertical Nest
1 X Vertical Base
1 X Medium Hydration Base
2 X Medium Covers
2 X Medium Cover Rings
2 X Medium Polycarbonate Windows
1 X Medium Nest Package of Water Beads
4 X Venting Plugs https://www.etsy.com/AntersAssemble/listing/1082533529
2 X Transparent Red Film
2 X Offset Tubes (Adapts upper ports to same level as lower ports) (Not yet shown)
2 X Swivel Connectors (https://www.etsy.com/AntersAssemble/listing/1368572489)
2 X 1/2Female to 1/2 Female coupler https://www.etsy.com/AntersAssemble/listing/916742212)
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Branch Tubing Splitter https://www.etsy.com/AntersAssemble/listing/916737950
1X 4 Way Tubing Splitter https://www.etsy.com/AntersAssemble/listing/898599533
2X Single and 2X Double Tubing Organizers
https://www.etsy.com/AntersAssemble/listing/947748858
4ft x ½ x ⅜ Vinyl Tubing https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Windows were removed due to glare in pictures.
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.
* Designed for carpenter ant species.
* Sidewall Humidification System
* Size: 4"X4" X 1.5"Thick (Excluding Base)
* Easy open for cleaning
* Plastic PETG
Go Vertical!!
Give your ants more dimensions with this stand up nest.
This double sided nest allows for viewing from both sides with several pass through points.
Built in side wall humidification that will keep your nest air from drying out. Just pour water into the base to rehydrate.
Anters Assemble bases are designed to use 10mm water beads (included) that maintain a constant humidity level without drying out too fast.
3D printed using PETG.
There are 2 nest entrances mid way up the nest and 2 on the base. The two higher ports will allow your to string more vertical nest together. The two on the base will align with the standard horizontal nests we offer.
Lipped edges help prevent eggs and larvae from falling between the nest and windows.
Nests incorporate standard Anters Assemble glue-less window installation. Can be removed with a small flathead screwdriver or coin.
The standing portion of the nest is solvent cemented, sealing the two pieces together preventing any possible escape between the two sides. Extra reinforcement is given near the mid nest entrance ports to prevent separation. These ports are have custom threaded inserts what can attach to any Anters Assemble male connectors or standard 1/2" OD tubing.
Spring loaded levers hold the covers in place which will allow you to remove just one side of the nest at time if you wish.
The double vertical nest snaps into place.
The nest-to-base entrance is lined with PVC tubing.
The assembly can be taken apart for cleaning.
Gen 2 improvements:
* Easy open window ring system makes it quick and simple to take apart for cleaning. All you need is a coin.
* Redesigned to an aesthetic nest cover inspired by an ant's thorax.
* Ironed top surfaces to allow the window to lay flush and to reduced gaps in the print.
3D printed using PETG which won't rot and crack when exposed to water unlike PLA printed parts.
Connectors printed using Tough Resin.
Nest chamber depth is ~1/2".
Includes:
1 X Double Sided Vertical Nest
1 X Vertical Base
1 X Medium Hydration Base
2 X Medium Covers
2 X Medium Cover Rings
2 X Medium Polycarbonate Windows
1 X Medium Nest Package of Water Beads
4 X Venting Plugs https://www.etsy.com/AntersAssemble/listing/1082533529
2 X Transparent Red Film
2 X Offset Tubes (Adapts upper ports to same level as lower ports) (Not yet shown)
2 X Swivel Connectors (https://www.etsy.com/AntersAssemble/listing/1368572489)
2 X 1/2Female to 1/2 Female coupler https://www.etsy.com/AntersAssemble/listing/916742212)
Recommended but Optional Accessories Kit:
2X 16X100mm Feeding Tubes https://www.etsy.com/AntersAssemble/listing/1275137390
2X Feeding Tube Male Adapters https://www.etsy.com/AntersAssemble/listing/897170935
2X Feeding Tube Female Adapter https://www.etsy.com/AntersAssemble/listing/883506308
1X 3 Way Branch Tubing Splitter https://www.etsy.com/AntersAssemble/listing/916737950
1X 4 Way Tubing Splitter https://www.etsy.com/AntersAssemble/listing/898599533
2X Single and 2X Double Tubing Organizers
https://www.etsy.com/AntersAssemble/listing/947748858
4ft x ½ x ⅜ Vinyl Tubing https://www.etsy.com/AntersAssemble/listing/952232860
Note:
Our nests are not designed to provide direct access to drinking water. You will need to attach external feeding tubes which are available in the optional accessories kit or sold separately.
Windows were removed due to glare in pictures.
We now offer outworlds (foraging grounds), it is a must for your ants to survive. Sold Separately.